Toggle Main Menu Toggle Search

Open Access padlockePrints

An FE model of a cellular polypropylene: exploring mechanical properties

Lookup NU author(s): Pavlos Sgardelis, Dr Michele Pozzi

Downloads


Licence

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0).


Abstract

Several analytical models have been suggested to describe the changes in the electromechanical properties of Cellular Polypropylene (Cell-PP) due to charging. However, there is a limited number of studies considering the non-linear dependence of the piezoelectric coefficient d33 on the mechanical load applied. One of the main reasons for this nonlinearity is the stiffness of the film that increases proportionally to the applied mechanical load. Moreover the size and shape distribution of the enclosed voids is an important determinant of the electromechanical properties.In this work, the geometry of a 3D model of Cell-PP is designed on the basis of analytical Splines. Both the manufacturing procedure of Cell-PP films (bi-axial stretching) and the pressure expansion treatment were simulated in order to account for a realistic void distribution. The FEA is done on a 2D cross-section of the modelled film. The modelled mechanical response is analysed based on increasing mechanical load applied. The load-deflection curves obtained from the analysis are then compared to the experimental results acquired via Dynamical Mechanical Analyzer (DMA) to validate the model. Four types of Cell-PP films, expanded at different pressures, were used in this validation. The aim is to develop a model that describes the effect of morphological parameters on the stiffness of the films by simulating the manufacturing procedure.


Publication metadata

Author(s): Sgardelis P, Pozzi M

Publication type: Conference Proceedings (inc. Abstract)

Publication status: Published

Conference Name: Smart Sensors, Actuators and MEMS VIII

Year of Conference: 2017

Print publication date: 31/05/2017

Online publication date: 31/05/2017

Acceptance date: 20/06/2017

Date deposited: 28/06/2017

Publisher: SPIE

URL: http://dx.doi.org/10.1117/12.2266265

DOI: 10.1117/12.2266265

Series Title: SPIE Microtechnologies


Share