Toggle Main Menu Toggle Search

Open Access padlockePrints

Relative efficiency of radiation sources for photopolymerization

Lookup NU author(s): Dr Rie Nomoto, Professor John McCabe

Downloads

Full text for this publication is not currently held within this repository. Alternative links are provided below where available.


Abstract

The aim of this study was to evaluate the characteristics of new-generation light-emitting diode (LED) units in comparison with the conventional tungsten-halogen, plasma arc, and first-generation LED units reported in our previous study. The irradiance of light from new-generation LED units, the temperature rise of the bovine enamel surface, and the depth of cure of composites exposed to each unit were investigated. The irradiances in the range 400-515 nm emitted from the new-generation LED units were greater than those from the first-generation LED units. The temperature increase was 15-25A degrees C for new-generation LED units compared with a typical value of 5A degrees C for the first-generation LED units at 10 s of irradiation. The relationship between the depth of cure and the logarithm of total exposure energy suggested that LED units can cure light-cured composite resins more efficiently than tungsten-halogen or plasma arc units.


Publication metadata

Author(s): Nomoto R, McCabe JF, Nitta K, Hirano S

Publication type: Article

Publication status: Published

Journal: Odontology

Year: 2009

Volume: 97

Issue: 2

Pages: 109-114

ISSN (print): 1618-1247

ISSN (electronic):

Publisher: Springer

URL: http://dx.doi.org/10.1007/s10266-009-0105-8

DOI: 10.1007/s10266-009-0105-8


Altmetrics

Altmetrics provided by Altmetric


Share