Design of an underwater positioning sensor for crawling ship hull maintenance robots

  1. Lookup NU author(s)
  2. Noppadon Tunwattana
  3. Dr Rosemary Norman
  4. Professor Tony Roskilly
Author(s)Tunwattana N, Norman R, Roskilly AP
Publication type Article
JournalProceedings of the Institution of Mechanical Engineers Part M: Journal of Engineering for the Maritime Environment
ISSN (print)1475-0902
ISSN (electronic)2041-3084
Full text for this publication is not currently held within this repository. Alternative links are provided below where available.
recent years there has been a significant increase in the automation of ship hull maintenance tasks such as cleaning, paint stripping, and in-water inspection. This is driven by several factors including reduction in cost, environmental hazard, and impact on the health of workers. The development of autonomous systems has been limited by the availability of suitable position sensors capable of providing accurate and repeatable information to a robot control system. This paper presents the development of an optical position sensor (OPS) suitable for use both underwater and in air, and designed to operate on a crawling ship hull robot. The OPS provides dead-reckoning position data which may be used in conjunction with a landmark position sensor for navigation of a robot. The OPS was based on an optical mouse sensor and telecentric lens and has been shown to provide accurate position information over a range of test speeds and working distances and when operating under non-ideal conditions in terms of angle with respect to the ship hull surface.
PublisherProfessional Engineering Publishing Ltd.
Actions    Link to this publication

Altmetrics provided by Altmetric