Toggle Main Menu Toggle Search

Open Access padlockePrints

Effects of winding angle on the behaviour of glass/epoxy pipes under multiaxial cyclic loading

Lookup NU author(s): Professor Geoff Gibson

Downloads

Full text for this publication is not currently held within this repository. Alternative links are provided below where available.


Abstract

The effects of winding angle on the behaviour of glass/epoxy composite tubes under multiaxial cyclic loading were investigated. The performance of such composite tubes was studied using,an indigenous automated test procedure that is compatible with the internal qualification requirements of the composite pipe manufacturers. Glass fibre reinforced epoxy (GRE) composite pipes with three winding angles, namely, [1 +/- 45 degrees](4), [+/- 55 degrees](4), and [+/- 63 degrees](4), were tested. A novel automated test rig was fabricated to accommodate five stress ratios, ranging from pure axial to pure hoop loadings. The cyclic pressure test was conducted until droplets of water were seen on the outer surface of the pipe. Failure envelopes were then constructed based on the first ply failure (FPF) points determined from the axial stress to hoop strain response at five stress ratios. Three functional failure modes, namely, tensile axial, weepage, and local leakage failures, were observed during the tests. The results indicate that each winding angle dominates a different optimum pressure loading condition, namely, [+/- 55 degrees](4) for pure hydrostatic loading, [+/- 45 degrees](4) for hoop to axial loading, and [+/- 63 degrees](4) for quad hoop to axial loading. The envelopes show a strong dependence on the stress ratio and winding angle. (C) 2015 Elsevier Ltd. All rights reserved.


Publication metadata

Author(s): Krishnan P, Majid MSA, Afendi M, Gibson AG, Marzuki HFA

Publication type: Article

Publication status: Published

Journal: Materials & Design

Year: 2015

Volume: 88

Pages: 196-206

Print publication date: 25/12/2015

Online publication date: 04/09/2015

Acceptance date: 31/08/2015

ISSN (print): 0261-3069

ISSN (electronic): 1873-4197

Publisher: Elsevier Ltd

URL: http://dx.doi.org/10.1016/j.matdes.2015.08.153

DOI: 10.1016/j.matdes.2015.08.153


Altmetrics

Altmetrics provided by Altmetric


Funding

Funder referenceFunder name
SIRIM, Swagelok
National Instruments
03-01-15-SF0202Ministry of Science and Technology Innovation [MOSTI], Malaysia

Share