Toggle Main Menu Toggle Search

Open Access padlockePrints

Design and simulation of a two- or four-stroke free-piston engine generator for range extender applications

Lookup NU author(s): Dr Boru Jia, Dr Andrew SmallboneORCiD, Professor Tony Roskilly

Downloads

Full text for this publication is not currently held within this repository. Alternative links are provided below where available.


Abstract

Free-piston engines (FPEs) are known to have a greater thermal efficiency (40-50%) than an equivalent and more conventional four-stroke reciprocating engines (30-40%). Modern FPEs are proposed for the generation of electric and hydraulic power, with a potential application in hybrid electric vehicles. The numerous FPE configurations considered to date have almost exclusively operated using a two-stroke thermodynamic cycle to improve the thermal efficiency, however it is well known that the application of two-stoke cycles can be limited by noise and exhaust gas emissions constraints. In this article, a numerical model is used to investigate the techno-feasibility of operating Newcastle University's FPE prototype using a two- or four-stroke thermodynamic cycle. If operated as a four-stroke cycle, the linear generator must be used as both a motor and a generator resulting in a more irregular piston motion compared to corresponding operating in a two-stroke cycle. In four-stroke cycles, almost half the indicated power is consumed in overcoming the pumping losses of the motoring process. Whilst the heat release process is appears to be closer to a constant volume process when operated on two-stroke engine cycle, the peak cylinder pressure and compression ratio proved lower. In addition, a narrower power range is reported for a four-stroke cycle despite a corresponding higher thermal efficiency. (C) 2016 Elsevier Ltd. All rights reserved.


Publication metadata

Author(s): Jia BR, Smallbone A, Zuo ZX, Feng HH, Roskilly AP

Publication type: Article

Publication status: Published

Journal: Energy Conversion and Management

Year: 2016

Volume: 111

Pages: 289-298

Print publication date: 01/03/2016

Online publication date: 08/01/2016

Acceptance date: 27/12/2015

ISSN (print): 0196-8904

ISSN (electronic): 1879-2227

Publisher: Elsevier Ltd

URL: http://dx.doi.org/10.1016/j.enconman.2015.12.063

DOI: 10.1016/j.enconman.2015.12.063


Altmetrics

Altmetrics provided by Altmetric


Share