Toggle Main Menu Toggle Search

Open Access padlockePrints

Effect of deformation in bending on magnetic Barkhausen noise in low alloy steel

Lookup NU author(s): Mohamed Blaow, Emeritus Professor Terry Evans, Professor Brian Shaw

Downloads

Full text for this publication is not currently held within this repository. Alternative links are provided below where available.


Abstract

The influence of bending deformation on magnetic Barkhausen noise (MBN) was studied in low alloy steel. The peak height of the rectified MBN profile was observed to increase systematically with increasing tensile strain until the onset of plastic deformation. Increasing compressive strain initially produced a reduction in peak height, but more complex behaviour was observed at larger values. In particular, broadened profiles were produced under compression, which may indicate the presence of two or more overlapping peaks. As confirmed by X-ray diffraction measurements, one effect of plastic deformation is to leave a residual compressive stress on the tension side of the specimen and a residual tensile stress on the compression side. Measurements of residual stress were correlated with MBN peak height, to the extent that both quantities show functional forms similar to the theoretical relationship between residual stress and the bending moment applied prior to unloading. © 2004 Elsevier B.V. All rights reserved.


Publication metadata

Author(s): Blaow M, Evans JT, Shaw B

Publication type: Article

Publication status: Published

Journal: Materials Science and Engineering A

Year: 2004

Volume: 386

Issue: 1-2

Pages: 74-80

ISSN (print): 0921-5093

ISSN (electronic): 1873-4936

Publisher: Elsevier SA

URL: http://dx.doi.org/10.1016/j.msea.2004.08.007

DOI: 10.1016/j.msea.2004.08.007


Altmetrics

Altmetrics provided by Altmetric


Share