Toggle Main Menu Toggle Search

Open Access padlockePrints

Performance of an up-flow anaerobic stage reactor (UASR) in the treatment of pharmaceutical wastewater containing macrolide antibiotics

Lookup NU author(s): Shreeshivadasan Chelliapan, Dr Paul Sallis

Downloads

Full text for this publication is not currently held within this repository. Alternative links are provided below where available.


Abstract

The performance of an up-flow anaerobic stage reactor (UASR) treating pharmaceutical wastewater containing macrolide antibiotics was investigated. Specifically, it was determined whether a UASR could be used as pre-treatment system at an existing pharmaceutical production plant to reduce the antibiotics in the trade effluent. Accordingly, a UASR was developed with an active reactor volume of 11 L being divided into four 2.75 L stages. Each stage of the reactor was an up-flow sludge blanket reactor and had a 3-phase separator baffle to retain biomass. The reactor was fed with real pharmaceutical wastewater containing Tylosin and Avilamycin antibiotics and operated with step-wise increases in the reactor organic loading rate (OLR) from 0.43 to 3.73 kg chemical oxygen demand (COD) m-3 d-1, and then reduced to 1.86, over 279 days. The process performance of the reactor was characterised in terms of its COD removal, Tylosin reduction, pH, VFA production, methane yield and sludge washout. At a total hydraulic retention time (HRT) of 4 d and OLR of 1.86 kg COD m-3 d-1, COD reduction was 70-75%, suggesting the biomass had acclimated to the antibiotics. Furthermore, an average of 95% Tylosin reduction was achieved in the UASR, indicating that this antibiotic could be degraded efficiently in the anaerobic reactor system. In addition, the influence of elevated Tylosin concentrations on the UASR process performance was studied using additions of Tylosin phosphate concentrate. Results showed similar efficiency for COD removal when Tylosin was present at concentrations ranging from 0 to 400 mg L-1 (mean removal over this range was 93%), however, at Tylosin concentrations of 600 and 800 mg L-1 there was a slight decline in treatment efficiency at 85% and 75% removal, respectively. © 2005 Elsevier Ltd. All rights reserved.


Publication metadata

Author(s): Chelliapan S, Wilby T, Sallis PJ

Publication type: Article

Publication status: Published

Journal: Water Research

Year: 2006

Volume: 40

Issue: 3

Pages: 507-516

Print publication date: 01/02/2006

ISSN (print): 0043-1354

ISSN (electronic): 1879-2448

Publisher: Pergamon

URL: http://dx.doi.org/10.1016/j.watres.2005.11.020

DOI: 10.1016/j.watres.2005.11.020

PubMed id: 16387347


Altmetrics

Altmetrics provided by Altmetric


Share