Lookup NU author(s): Dr Jinju Chen,
Professor Steve Bull
Full text for this publication is not currently held within this repository. Alternative links are provided below where available.
The nanoindentation test is the only viable approach to assess the properties of very thin coatings (< 1 mu m) since it can operate at the required scale and provides a fingerprint of the indentation response or the coating/substrate system. To measure the hardness of the coating only it is traditionally assumed that, as a rule-of-thumb, when the relative indentation depth (RID, i.e. the penetration divided by the coating thickness) is less than 0.1, the substrate will not affect the measured hardness of the coating. However, it is found that this rule is too strict for some and too loose for other coated systems. In this paper we present a comprehensive investigation of the factors influencing the critical relative indentation depth (CRID) using finite element simulation. The CRID is very sensitive to tip radius for soft coatings oil hard substrates. For most coating/substrate combinations at reasonable penetration depths the 0.1 rule-of-thumb is a safe estimate. It is shown that the elastic property mismatch between coating and substrate also has an important effect on the measured hardness and this means that the Oliver and Pharr method generally used to extract hardness from nanoindentation data may give inaccurate results in coating/substrate systems with significant elastic mismatch. (C) 2008 Elsevier Ltd. All rights reserved.
Author(s): Chen J, Bull SJ
Publication type: Review
Publication status: Published
ISSN (print): 0042-207X
ISSN (electronic): 1879-2715