Lookup NU author(s): Arul Murugan,
Dr Alan Thursfield,
Professor Ian Metcalfe
Full text for this publication is not currently held within this repository. Alternative links are provided below where available.
A comparison is made between La0.6Sr0.4Co0.2Fe0.8O3-delta and La0.7Sr0.3FeO3-delta perovskite-type oxides, co-precipitated iron oxide (60% Fe2O3/Al2O3) and supported nickel oxide (20% NiO/Al2O3) as oxygen carrier materials for the water-gas shift reaction in a chemical looping process with the goal of steady production of hydrogen over more than 100 redox cycles. A temperature programmed survey of redox activity over five cycles was used to confirm the potential of the materials as oxygen carriers for this reaction and give some idea of appropriate temperatures for operation. Isothermal redox cycles at 850 degrees C were performed with the most promising materials, 60% Fe2O3/Al2O3 and La0.7Sr0.3FeO3-delta. Initially the 60% Fe2O3/Al2O3 produced over double the amount of hydrogen (on a mass basis) compared to La0.7Sr0.3FeO3-delta, but following 150 cycles performances from both materials were similar. More importantly, the perovskite material showed a steady hydrogen production over more than 100 cycles whereas the 60% Fe2O3/Al2O3 never showed steady hydrogen production. It can be concluded that La0.7Sr0.3FeO3-(delta) is an attractive material for the chemical looping water-gas shift process.
Author(s): Murugan A, Thursfield A, Metcalfe IS
Publication type: Article
Publication status: Published
Journal: Energy & Environmental Science
Print publication date: 15/09/2011
Date deposited: 14/03/2012
ISSN (print): 1754-5692
ISSN (electronic): 1754-5706
Publisher: Royal Society of Chemistry
Altmetrics provided by Altmetric