Lookup NU author(s): Oliver Warlow,
Dr Sian Lawson
Full text for this publication is not currently held within this repository. Alternative links are provided below where available.
A method of kinematic analysis of the fingers using stereo-photogrammetry, referred to as the phalanx transformation technique, has been proposed. Functional methods were used to define the joint axes and subsequently each finger segments' anatomical coordinate system. Thirteen subjects were tested and the accuracy of the technique assessed. The average error across the three joints of the finger was found to be 0.6 mm, which translates to a 2.2% error in predicted joint reaction force when using a biomechanical model. The subjects were required to have sufficient movement in their joints to define the joint axes functionally. Some subjects of clinical interest can have a significantly reduced mobility owing to injury or pathology, therefore, the effect of calibration range of motion on accuracy was analysed. It was found that, for a range of motion typical of a subject with rheumatoid arthritis, the errors in predicted joint reaction force were <7%. The accuracy of this technique compared favourably with others previously proposed and, considering the other errors inherent in modelling, those found in this study were deemed to be acceptable.
Author(s): Warlow OME, Lawson SEM
Publication type: Article
Publication status: Published
Journal: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine
Print publication date: 01/05/2012
ISSN (print): 0954-4119
ISSN (electronic): 2041-3033
Publisher: Sage Publications Ltd.
Altmetrics provided by Altmetric