Lookup NU author(s): Professor Tony Roskilly
Full text for this publication is not currently held within this repository. Alternative links are provided below where available.
This article presents a fuel characterisation study using Pakistani coals with reference to gasification. Pakistan has reasonable quantities of coal reserves, but most of this natural resource is underutilised. The energy crisis in the country demands investigating new avenues. Gasification of coal is one of the available alternatives. A detailed analysis of indigenous coal for the feasibility of gasification to generate power is desired. Six samples from the Chakwal coal mines in Pakistan were collected and analysed for proximate, ultimate, thermogravimetric (TG) and X-ray florescent spectrometric analyses. Numerous gasification processes are being employed in the world for power generation, district heating, factory, in-house, utility, etc. Almost all types of coals can be used, but the main issues are the polluting effect on the environment, economic justification and employment of suitable technology. The results show that the Chakwal coals have manageable quantity of moisture (3-6%), high volatile matter, high ash (10-30%), relatively low sulphur (0.2-0.9%) and trace of chlorine. The ash fusion temperature is >1350 degrees C. Thus, slagging and clinker formation of ash may be a remote possibility during gasification. The TG analyses suggest a high loss of weight due to temperature. The calorific value of coals is estimated to be between 18.8 and 25.5 MJ kg(-1) (calculated by Dulong formula), which is significantly variant.
Author(s): Naveed S, Malik A, Akram M, Deary M, Roskilly AP
Publication type: Article
Publication status: Published
Journal: Journal of the Energy Institute
Print publication date: 01/02/2013
ISSN (print): 1743-9671
ISSN (electronic): 1746-0220
Publisher: Maney Publishing
Altmetrics provided by Altmetric