Lookup NU author(s): Professor Stefano Utili
Full text for this publication is not currently held within this repository. Alternative links are provided below where available.
water waves due to rockslides plunging into awater reservoir. Quasi-3D DEM analyses in plane strain bya coupled DEM-CFD code are adopted to simulate therockslide from its onset to the impact with the still waterand the subsequent generation of the wave. The employednumerical tools and upscaling of hydraulic properties allowpredicting a physical response in broad agreement with theobservations notwithstanding the assumptions and characteristicsof the adopted methods. The results obtained bythe DEM-CFD coupled approach are compared to thosepublished in the literature and those presented by Crostaet al. (Landslide spreading, impulse waves and modellingof the Vajont rockslide. Rock mechanics, 2014) in acompanion paper obtained through an ALE-FEM method.Analyses performed along two cross sections are representativeof the limit conditions of the eastern and westernslope sectors. The max rockslide average velocity and thewater wave velocity reach ca. 22 and 20 m/s, respectively.The maximum computed run up amounts to ca. 120 and170 m for the eastern and western lobe cross sections, respectively.These values are reasonably similar to thoserecorded during the event (i.e. ca. 130 and 190 m, respectively).Therefore, the overall study lays out a possibleDEM-CFD framework for the modelling of the generationof the hydrodynamic wave due to the impact of a rapidmoving rockslide or rock–debris avalanche.
Author(s): Zhao T, Utili S, Crosta GB
Publication type: Article
Publication status: Published
Journal: Rock Mechanics and Rock Engineering
Print publication date: 01/06/2016
Online publication date: 13/03/2015
Acceptance date: 27/02/2015
ISSN (print): 0723-2632
ISSN (electronic): 1434-453X
Altmetrics provided by Altmetric