Lookup NU author(s): Dr Stevin Pramana
Full text for this publication is not currently held within this repository. Alternative links are provided below where available.
There has been a growing interest in 1-D metal oxide semiconducting nanostructures due to their stable chemical properties and potential applications in large-area, low-cost and flexible substrates. In this current work, we used field effect transistors (FETs) built on sub-millimetre scale metal oxide nanonet to characterize the nanowire surface properties. Two variations of SnO<inf>2</inf> nanowires, denoted as 0% O<inf>2</inf> and 0.5% O<inf>2</inf>-Ar, were grown by changing the O<inf>2</inf> concentration in the growth atmosphere. HR-TEM images exhibit two dissimilar surface morphologies which represent diverse surface-defect levels. While the devices showed very little semiconducting behaviour in humid air, the flow in the dry air decreased the density of free carriers dramatically. Both water vapour and oxygen were observed to contribute to the hysteresis of transfer curves. Under white light illumination, 0% O<inf>2</inf> nanonet devices exhibited a significant photocurrent response in the controlled environment while almost no changes were observed for 0.5% O<inf>2</inf> ones. These results confirmed the significant role of surface defects in metal-oxide nanowires and implied great potential for SnO<inf>2</inf> nanonet FETs in the application of water gas sensors and photodetectors. © 2014 The Royal Society of Chemistry.
Author(s): Sun C, Karthik KRG, Pramana SS, Wong LH, Zhang J, Yizhong H, Sow CH, Mathews N, Mhaisalkar SG
Publication type: Article
Publication status: Published
Journal: Journal of Materials Chemistry C
Print publication date: 07/02/2014
Online publication date: 15/11/2013
Acceptance date: 13/11/2013
ISSN (print): 2050-7534
ISSN (electronic): 2050-7526
Publisher: Royal Society of Chemistry
Altmetrics provided by Altmetric