Toggle Main Menu Toggle Search

Open Access padlockePrints

An experimental study on tool wear behaviour in micro milling of nano Mg/Ti metal matrix composites

Lookup NU author(s): Xiangyu Teng, Dr Dehong Huo, Dr Islam Shyha, Dr Wanqun Chen, Dr Eugene Wong

Downloads


Abstract

© 2018 Springer-Verlag London Ltd., part of Springer Nature With the development of metal matrix composites (MMCs), the mechanical properties of MMCs with a small volume fraction of nano-sized particles were found to be even superior to that with a larger content of micron-sized particles. However, the improved mechanical properties of MMCs bring tremendous challenges such as premature tool failure in Ti machining process. This study exhibits an investigation on tool wear in micro milling of magnesium-based MMCs reinforced with 1.98 Vol.% of nano-sized titanium particles using 0.5-mm diameter two-flute tungsten carbide micro endmills. The tool wear was characterised both quantitatively and qualitatively by observing tool wear patterns and analysing the effect of cutting parameters on flank wear, reduction in tool diameter, cutting forces, surface roughness, and burr formation. A finite element model was established to understand matrix deformation and interaction between tool-particle and further explain the tool wear phenomena observed. Additionally, cutting performance using AlTiN coated and uncoated was also investigated. The results indicated that the main wear mechanisms were identified as flank wear and edge chipping due to abrasive wear and chip adhesion in uncoated micro endmills. These wear mechanisms were confirmed by chip formation process produced by finite element modelling (FEM). It was also observed that the largest tool wear occurred at the smallest feed per tooth (0.75 μm/tooth) and smallest wear occurred at the largest feed per tooth (3 μm/tooth). Also, the effect of BUE on tool wear and surface generation was studied.


Publication metadata

Author(s): Teng X, Huo D, Shyha I, Chen W, Wong E

Publication type: Article

Publication status: Published

Journal: International Journal of Advanced Manufacturing Technology

Year: 2018

Volume: 96

Issue: 5-8

Pages: 2127-2140

Print publication date: 01/05/2018

Online publication date: 19/02/2018

Acceptance date: 24/01/2018

Date deposited: 26/03/2018

ISSN (print): 0268-3768

ISSN (electronic): 1433-3015

Publisher: Springer UK

URL: https://doi.org/10.1007/s00170-018-1672-z

DOI: 10.1007/s00170-018-1672-z


Altmetrics

Altmetrics provided by Altmetric


Actions

Find at Newcastle University icon    Link to this publication


Share