Toggle Main Menu Toggle Search

Open Access padlockePrints

Investigation of equilibrium and dynamic performance of SrCl2-expanded graphite composite in chemisorption refrigeration system

Lookup NU author(s): Ye Yuan, Dr Huashan Bao, Dr Zhiwei Ma, Dr Yiji LuORCiD, Professor Tony Roskilly

Downloads


Licence

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License (CC BY-NC-ND).


Abstract

This work experimentally investigated adsorption equilibrium and reaction kinetics of ammonia adsorption/desorption on the composite of strontium chloride (SrCl2) impregnated into expanded graphite, and also discussed the potential influence of the addition of expanded graphite on the SrCl2-NH3 reaction characteristics. The measured and analysed results can be very useful information to design the system and operating conditions using the similar chemisorption composites. Equilibrium concentration characteristics of ammonia within the studied composite were measured using the heat sources at 90°C, 100°C and 110°C for the decomposition process, where the degree of conversion achieved 50%, 78% and 96% respectively. Therefore, the equilibrium equation reflecting the relationship between temperature, pressure and concentration was developed, and a pseudo-equilibrium zone was found, which should be useful information to setup the system operating condition for the desired global transformation. It was suspected that the addition of expanded graphite altered the reaction equilibrium due to the pore effect and the salt-confinement. The concept of two-stage kinetic model was proposed and kinetic parameters were determined by fitting experimental data. The developed kinetic equations can predict dynamic cyclic performance of a reactive bed in similar geometric structure with reasonable accuracy. Such a chemisorption cycle using the SrCl2-expnaded graphite (mass ratio 2:1) composite can be used for cooling application, and the maximum SCP value can be achieved as high as 656 W/kg at t = 2.5 min, and the COP can be 0.3 after one hour of synthesis process under the condition of Tev = 0°C, Tcon = 20°C, Theat = 110°C.


Publication metadata

Author(s): Yuan Y, Bao HS, Ma ZW, Lu YJ, Roskilly AP

Publication type: Article

Publication status: Published

Journal: Applied Thermal Engineering

Year: 2018

Volume: 147

Pages: 52-60

Print publication date: 25/01/2019

Online publication date: 17/10/2018

Acceptance date: 17/10/2018

Date deposited: 18/10/2018

ISSN (print): 1359-4311

ISSN (electronic): 1873-5606

Publisher: Elsevier

URL: https://doi.org/10.1016/j.applthermaleng.2018.10.071

DOI: 10.1016/j.applthermaleng.2018.10.071


Altmetrics

Altmetrics provided by Altmetric


Funding

Funder referenceFunder name
EP/N02155X/1EPSRC
EP/P001173/1EPSRC
EP/P001173/1EPSRC

Share