Toggle Main Menu Toggle Search

Open Access padlockePrints

Energy Generation Efficiency and Strength Coupled Design and Optimization of Wind Turbine Rotor Blades

Lookup NU author(s): Professor Pengfei Liu

Downloads

Full text for this publication is not currently held within this repository. Alternative links are provided below where available.


Abstract

© 2019 American Society of Civil Engineers.Wind turbine rotor failures have been reported that resulted in substantial damage and cost for maintenance and recovery. This work developed a wind turbine rotor blade design and optimization method to address a coupled energy generation efficiency and blade structural strength design issue, as a generic procedure applicable to both turbine rotors and propellers, in air and water. The optimization procedure was developed for optimum radial blade sectional thickness distribution with a prescribed constant safety factor across the span. While maintaining the required structural strength and integrity of the rotor blades, this procedure is to achieve the following objectives: (1) reduce material use to minimum and (2) obtain the optimum power generation efficiency with the optimum structural strength. A propeller-turbine rotor code coupling aerodynamic and structural properties was developed. For a given blade geometry and chosen material, performance prediction of the instantaneous loading acting on all blade sections and the strength of a local blade section was performed and optimized. A time-domain, three-dimensional unsteady panel method was implemented, developed, and used to perform the optimization. A wind turbine 10 m in diameter from the National Renewable Energy Laboratory (NREL) (Golden, Colorado) was used as a base design example and for optimization based on an extreme wind speed of 100 km/h. The final result achieved a total savings of 18.72% in blade material.


Publication metadata

Author(s): Xu Y, Liu P, Penesis I, He G, Heidarian A, Ghassemi H

Publication type: Article

Publication status: Published

Journal: Journal of Energy Engineering

Year: 2019

Volume: 145

Issue: 2

Online publication date: 08/02/2019

Acceptance date: 19/10/2018

ISSN (print): 0733-9402

ISSN (electronic): 1943-7897

Publisher: American Society of Civil Engineers (ASCE)

URL: https://doi.org/10.1061/(ASCE)EY.1943-7897.0000599

DOI: 10.1061/(ASCE)EY.1943-7897.0000599


Altmetrics

Altmetrics provided by Altmetric


Actions

Find at Newcastle University icon    Link to this publication


Share