Lookup NU author(s): Professor Steve Bull
Full text for this publication is not currently held within this repository. Alternative links are provided below where available.
The scratch test has been used to assess thin coating adhesion for some time now. In this test a diamond indenter is drawn across the coated surface under an increasing load (either stepwise or continuous) until at some load, termed the critical load, Lc, a well-defined failure event occurs; if this failure event represents coating detachment then the critical load can be used as a qualitative measure of coating-substrate adhesion. However, it is well known that a range of possible failure modes can occur and only some of these are dependent on adhesion. Other failure modes which depend on plastic deformation and fracture within the coating, rather than any adhesive failure at the coating substrate interface, may be just as useful in the assessment of coating quality particularly for tribological applications. In this paper the load regimes in which the main adhesion-related failure modes (spallation and buckling) occur as a function of coating thickness will be presented for thermally grown oxide and sputtered nitride coatings. The origin of the observed failure modes and the use of the scratch test to assess coating/substrate adhesion in a more quantitative fashion is discussed in the light of these observations. © 1997 Elsevier Science Ltd.
Author(s): Bull SJ
Publication type: Article
Publication status: Published
Journal: Tribology International
Print publication date: 01/07/1997
ISSN (print): 0301-679X
ISSN (electronic): 1879-2464
Altmetrics provided by Altmetric