Lookup NU author(s): Dr Alasdair Charles,
Dr Gaoyi Sui
Full text for this publication is not currently held within this repository. Alternative links are provided below where available.
Corrosion fatigue data for alloy 600 in simulated primary side, pressurised water reactor (PWR) coolant and in oxygenated pure water (OPW) have been reviewed. Higher crack growth rates occur in these environments than in air and the former show a dependence upon frequency of loading, v, and R ratio. The da/dN versus ΔK plots have a tendency to show plateau regions where da/dN remains constant with increasing ΔK. The enhancements of crack growth over those in air due to cyclic loading are larger in OPW than in simulated PWR primary side water. If corrosion fatigue of alloy 600 was perceived of importance for reactor components, the existing data base will need to be extended and it would be necessary to generate more air fatigue data than is currently available. Conventional S-N fatigue and corrosion fatigue data from smooth surface specimens may also be required, collected taking due regard of the possible effects of R and v mentioned above. © 2001 Elsevier Science Ltd. All rights reserved.
Author(s): Sui G; Charles EA; Congleton J
Publication type: Article
Publication status: Published
Journal: Corrosion Science
ISSN (print): 0010-938X
Altmetrics provided by Altmetric