Lookup NU author(s): Maxim Candries,
Professor Mehmet Atlar,
Professor Ehsan Mesbahi,
Dr Kayvan Pazouki
Full text for this publication is not currently held within this repository. Alternative links are provided below where available.
An experimental study was carried out to compare the drag characteristics of a tin-free self-polishing co-polymer (SPC) and a foul release coating. Rotor measurements were carried out using different cylinders coated with both paint types. The experiments showed that the frictional resistance for the foul release test cylinders was lower than for the tin-free SPC cylinders. The drag characteristics were related to the roughness parameters of the tested surfaces measured with an optical measurement system. The measurements indicated that the texture of the foul release surface was significantly different from SPC systems. The findings show that the drag of a foul release coating will only correlate with a characteristic roughness measure that takes both the amplitude and the texture of the surface into account, and that is calculated at bandwidth parameters which depend on the degree of roughness.
Author(s): Candries M, Atlar M, Mesbahi E, Pazouki K
Publication type: Article
Publication status: Published
Print publication date: 01/04/2003
ISSN (print): 0892-7014
ISSN (electronic): 1026-7867
Publisher: Taylor & Francis Ltd.
PubMed id: 14618701
Altmetrics provided by Altmetric