Toggle Main Menu Toggle Search

Open Access padlockePrints

Magnetic Barkhausen emission technique for evaluation of residual stress alteration by grinding in case-carburised En36 steel

Lookup NU author(s): Dr Moorthy Vaidhianathasamy, Professor Brian Shaw

Downloads


Abstract

The effect of residual stress changes caused by grinding on the magnetic Barkhausen emission (MBE) has been studied in case-carburised En36 steel. Both high and low frequency MBE measurements were made on specimens with case-depth of 0.55 and 0.8 mm subjected to varying level of grinding damage. The high frequency MBE profile shows single peak while the low frequency MBE profile shows two peaks. The first peak is not affected by grinding damages. But, the second peak increases and shifts to lower field systematically indicating the changes in microstructure and residual stresses. Both high and low frequency MBE measurements have been correlated to residual stress (RS)-depth profile measured using X-ray diffraction method. The high frequency MBE indicates the changes in surface RS, but does not indicate changes in RS at depths >10 μm. The low frequency MBE profile indicates the changes in RS below the surface. © 2005 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.


Publication metadata

Author(s): Moorthy V, Shaw BA, Mountford P, Hopkins P

Publication type: Article

Publication status: Published

Journal: Acta Materialia

Year: 2005

Volume: 53

Issue: 19

Pages: 4997-5006

ISSN (print): 1359-6454

ISSN (electronic): 1873-2453

Publisher: Pergamon

URL: http://dx.doi.org/10.1016/j.actamat.2005.06.029

DOI: 10.1016/j.actamat.2005.06.029


Altmetrics

Altmetrics provided by Altmetric


Actions

Find at Newcastle University icon    Link to this publication


Share