Browse by author
Lookup NU author(s): Dr Konstantin VasilevskiyORCiD, Irina Nikitina, Dr Gordon Phelps, Dr Alton Horsfall, Professor Nick Wright
Full text for this publication is not currently held within this repository. Alternative links are provided below where available.
Zener diodes are widely used in electrical barriers to protect equipment operating in a potentially explosive atmosphere. Although normally not conducting, the zeners must have a high power rating so that their junction temperature meets safety factors when shunting the maximum fuse current. This often requires two or three lower voltage commercial zeners connected in series. Silicon carbide diodes have much higher thermal conductivity and maximum allowed junction temperature, so it should be possible to use one SiC zener in the place of two or three commercial diodes and/or allow use of higher fuse ratings. Low voltage SiC Zener diodes were fabricated and tested to evaluate potential benefits of their application as a component of intrinsically safe barriers. The diodes demonstrated mixed avalanche-tunnel breakdown at reverse bias voltages of 23 V with positive temperature coefficients of breakdown voltages of about 0.4 mV/°C The diodes with mesa area of 4×10 -4cm2 had maximum DC Zener current of 1.2 A and were capable of operating at ambient temperatures up to 500°C.
Author(s): Lark P, Vassilevski K, Nikitina I, Phelps GJ, Horsfall AB, Wright NG
Publication type: Conference Proceedings (inc. Abstract)
Publication status: Published
Conference Name: 6th European Conference on Silicon Carbide and Related Materials (ECSCRM 2006)
Year of Conference: 2007
Pages: 937-940
ISSN: 0255-5476
Publisher: Materials Science Forum: Trans Tech Publications Ltd
URL: http://dx.doi.org/10.4028/www.scientific.net/MSF.556-557.937
DOI: 10.4028/www.scientific.net/MSF.556-557.937
Library holdings: Search Newcastle University Library for this item
ISBN: 14226375
