Toggle Main Menu Toggle Search

Open Access padlockePrints

Contribution of the mooring system to the low-frequency motions of a semisubmersible in combined waves and current

Lookup NU author(s): Professor Martin Downie, Professor Atilla Incecik

Downloads

Full text for this publication is not currently held within this repository. Alternative links are provided below where available.


Abstract

This paper presents the results of an experiment carried out on a semi-submersible model to measure the steady drift force and low frequency surge motions. In the experiments, the influence of mooring systems was also investigated in different combinations of current and sea state. The measurements were carried out with a 1/50 scale model which was moored using horizontal springs and catenary mooring lines. A comparative study of the mean values of steady drift motions and the standard deviation of the low frequency motion amplitudes is presented. In addition, the effect of current on the damping ratio is discussed. It is found that for both horizontal and catenary moorings, the presence of a current increases the damping ratio of the system. For the catenary mooring system, as expected, the presence of mooring lines and their interaction with waves and current increases the damping compared to the damping of the horizontal mooring system. The measured mean values of the surge motions in a wave current field are compared to the superposed values of those obtained from waves and current separately. For the horizontal mooring, it is found that there is good agreement in moderate sea states, while in higher sea states the measured motion responses are larger. In the wave-current field, the standard deviation of the surge motion amplitudes is found to be less than that obtained in waves alone. This can be explained by the increased magnitude of the damping ratio. Only in the cases of high sea states with the horizontal mooring system, was it found that the standard deviation of the surge motions is slightly larger than those obtained for waves and current separately. This may be explained by the absence of catenary mooring line damping.


Publication metadata

Author(s): Hassan AMA, Downie MJ, Incecik A, Baarholm R, Berthelsen PA, Pakozdi C, Stansberg CT

Publication type: Conference Proceedings (inc. Abstract)

Publication status: Published

Conference Name: 28th International Conference on Ocean, Offshore and Arctic Engineering

Year of Conference: 2009

Pages: 55-62

Publisher: American Society of Mechanical Engineers

Library holdings: Search Newcastle University Library for this item

ISBN: 9780791843413


Share